After a long break on the project I started back on it by installing the recently ordered new, custom made, rudder cables. It should have been easy but I ran into some frustrations. For some reason I ordered 5/32" diameter cable. I should have ordered the cables as 1/8". I was tempted to use the 5/32" cable except that it doesn't fit into the original pulleys that are mounted in the rear of the fuselage. The pulleys are truly unnecessary since it's on a straight run of the cables. However, they were there, so I want to use them. I installed the 5/32" cable anyway to get a feel of the layout and reinstalled the bakelite bushings from the original cable run.
One of the interesting Dalotel features was that some of the bushings were screwed and then safety wired in place. The safety wire ran through the edge of the bakelite bushing. See attached picture.
I'm now working with A/C Spruce to get the correct sized rudder cables.